Categories
Tags
Recent Blogs
Truck Mixer Maintenance Checklist for Readymix Fleets: Parts That Wear First

What should a daily truck mixer check cover?
A daily truck mixer check covers the drum, chute and water system after washout, the hydraulic oil level and hoses, the gearbox and drum rollers for leaks or noise, and the truck's own walk-round items such as tyres, lights and brakes. It takes a few minutes and helps catch faults before they stop a delivery.
| Interval | Check | Part involved | Where to find it |
|---|---|---|---|
| Daily | Drum washed out, no concrete build-up on blades, hopper or chute | Drum blades, hopper, chute | Bulk enquiry |
| Daily | Hydraulic oil level, hose leaks, oil cooler clean | Hydraulic pump, motor, hoses, oil cooler | Truck mixer parts |
| Daily | Water tank, pump and valves working | Water pump, valves | Truck mixer parts |
| Weekly | Drum rollers and roller track for wear and noise; grease points | Drum rollers, bearings | Drum rollers |
| Weekly | Gearbox oil level, and gearbox and drum seals for oil leaks | Gearbox, seals | Truck mixer parts |
| Monthly | Drum blade wear, chute liners, mounting bolts and subframe | Blades, chute, mountings | Bulk enquiry |
| Monthly | Hydraulic filters and oil condition | Filters, oil | Truck mixer parts |
A thorough washout at the end of each day is the most useful habit for a mixer crew. Concrete left on the blades, in the hopper or around the chute hardens overnight, adds weight to the drum, and puts extra load on the rollers, gearbox and hydraulic drive on the next shift.
Use this table as a starting point and set the final intervals from the mixer and truck makers' service schedules.
What should be checked weekly and monthly?
Weekly checks focus on the parts that turn the drum: drum rollers, the roller track, grease points and gearbox and drum seals. Monthly checks look at slower wear: drum blades, chute liners, mounting bolts and the subframe, plus hydraulic filters and oil condition. Set the exact intervals from the makers' service schedules.
- Weekly: listen to the drum rollers while the drum turns, check the roller track for flats or cracks, and grease all points listed in the manual.
- Weekly: check the gearbox oil level, and check the gearbox, the drum seal and the hydraulic motor for oil leaks.
- Weekly: check hydraulic hoses for chafing where they run along the frame.
- Monthly: look inside the drum for blade wear and concrete build-up, and check chute liners.
- Monthly: check the subframe and mounting bolts for cracks and loose fixings.
- Monthly: check the hydraulic filter indicator and the oil for darkening or a burnt smell.
Do not skip the checks on the truck itself. Tyres, brakes, lights, the air system and the engine follow the truck maker's schedule, and a mixer that cannot drive cannot deliver, however good the drum is.
Record each check against the truck number. A simple log makes it easy to see which trucks are wearing parts faster and plan orders before a failure.
Keep the log with the truck or in a shared fleet sheet, so drivers, fitters and the stores team all work from the same record.

Which truck mixer parts wear out first?
Drum rollers, the drum gearbox, the hydraulic pump and motor, and the water pump usually wear out first, because they work on every load. Heat, long trips with a turning drum and concrete build-up add to the wear, and Gulf heat can shorten their life further.
| Part | Early warning sign | What causes faster wear |
|---|---|---|
| Drum rollers | Squealing or knocking, flat spots, roller track marks | Missed greasing, overloaded or unbalanced drum |
| Drum gearbox | Oil leaks, noise, metal in the oil | Low oil level, water getting in, shock loads |
| Hydraulic pump and motor | Noise, slow drum speed, hot oil | Dirty oil, blocked oil cooler, heat |
| Water pump (where fitted) | Low pressure, leaks, noisy running | Grit and cement in the water, running dry |
| Drum blades | Slow discharge, concrete left in the drum | Abrasive mixes, build-up from poor washout |
When a drum roller is worn, check the roller track on the drum at the same time. A new roller running on a damaged track wears quickly. Rollers are often replaced as a pair so the drum sits level; check the mixer maker's guidance.
A dirty oil cooler can make hydraulic pumps and motors wear early, because the oil runs hotter. Washing the cooler and keeping the oil clean protects the most expensive parts on the mixer.
How do you plan spare parts for a readymix fleet?
Plan spare parts by mixer make and model. List the wear parts each model uses, keep service items such as filters and seals on a standing order, and hold a small set of critical spares, such as a drum roller and water pump, so one failure does not take a truck off the road for long.
- List every mixer with its truck chassis, mixer make, model, drum size and serial number.
- For each model, list the service parts: filters, seals, grease and oil.
- Add the wear parts from your maintenance log, such as rollers, blades and water pumps.
- Group the list by model and send it as one bulk enquiry.
- Review the list every quarter against the parts actually fitted.
Fleets that run both truck mixers and concrete pumps can combine the lists, adding concrete pump parts such as wear plates and pistons to the same order.
What details are needed to order truck mixer parts?
To order truck mixer parts, send the mixer make, model and serial number from the mixer data plate, the drum size, and the truck chassis make and model. For hydraulic parts, add the pump and motor nameplate details. A photo of the worn part, with any markings, helps confirm the match.
| Detail | Where to find it |
|---|---|
| Mixer make, model and serial number | Data plate on the mixer body or frame |
| Drum size | Mixer data plate or order documents |
| Truck chassis make and model | Truck registration or chassis plate |
| Hydraulic pump and motor details | Nameplates on the pump and motor |
| Photo of the part | Taken before removal, showing any markings |
If the mixer data plate is missing or painted over, the drum and gearbox often carry their own plates or stampings. Photos of these, with the truck registration details, are usually enough to start matching the parts.
Register a business account to order online and request quotes, browse truck mixer parts and hydraulic pumps, or send your full list through the bulk enquiry form.
Gulf Parts Center supplies automotive, heavy equipment and industrial spare parts to businesses across the GCC, with next-day delivery to Saudi Arabia, UAE, Kuwait, Oman and Qatar, including customs clearance.
Frequently asked questions
How often should truck mixer gearbox oil be changed?
Change the drum gearbox oil at the interval in the mixer or gearbox maker's service schedule, and check the oil level every week in between. Change it early if the oil looks milky, which means water has got in, or if there is metal in it, and find the cause before refilling.
How often should drum rollers be inspected?
Follow the mixer maker's schedule. Between services, listen to the rollers while the drum turns and check for grease and flat spots, so wear is caught before a roller fails.
Why does a truck mixer hydraulic system run hot?
A dirty or blocked oil cooler is a common cause, because the oil cannot shed its heat. Low oil level, dirty oil and a worn pump or motor add to it, and Gulf summer heat makes it worse. Wash the cooler, check the oil level and filter, and have the pump and motor checked if the oil stays hot.



